SK DIN 69871
All tools available in different dimensions!
i-tecยฎ shrink fit chuck
| ย | SK-sizes | Execution / Notice | Representation |
|---|---|---|---|
| i-tecยฎ shrink fit chuck Standard version | SK 40 / 50 | The clamping diameter is designed for a shaft tolerance h6. |  |
| i-tecยฎ shrink fit chuck with CoolStream | SK 40 | The clamping diameter is designed for a shaft tolerance h6. With closable Cool- Stream holes. |  |
| i-tecยฎ shrink fit chuck with slim design | SK 40 / 50 | The clamping diameter is designed for a shaft tolerance h6. |  |
| i-tecยฎ shrink fit chuck with ultra short version | SK 40 | The clamping diameter is designed for a shaft tolerance h6. With closable CoolStream bores. |  |
ย
Quick change tapping chuck
| ย | SK-sizes | Execution / Notice | Representation |
|---|---|---|---|
| Thread cutting- Quick change chuck | SK 40 / 50 | For clamping end mills and cutter heads with longitudinal or transverse flutes. Centrally drilled as preparation for coolant supply. Cutter driver according to DIN 138. |  |
Intermediate sleeves
| ย | SK-sizes | Execution / Notice | Representation |
|---|---|---|---|
| Adapter sleeves for cylindrical shafts with inclined clamping surface (whistle notch) | SK 40 / 50 | For holding shank tools with inclined clamping surface (2ยฐ), DIN 1835 Form E and DIN 6535 Form HE. Adjusting screw drilled through for coolant. |  |
| Intermediate sleeves for cylindrical shafts with lateral driving surface (Weldon) | SK 40 / 50 | For holding shank tools with lateral driving surface, DIN 1835 Form B and DIN 6535 Form HB. |  |
| Intermediate sleeves for cylindrical shafts slim design | SK 40 / 50 | For holding shank tools with lateral driving surface, DIN 1835-1 Form B and inclined clamping surface (2ยฐ), DIN 1835-1 Form E, or DIN 6535 Form HB and HE. Adjusting screw drilled through for coolant. |  |
| Intermediate sleeves for Morse taper with expulsion tabs | SK 40 / 50 | ย |  |
| Intermediate sleeves for Morse taper with tightening thread | SK 40 / 50 | ย |  |
ย
Solid drill holder
| ย | SK-sizes | Execution / Notice | Representation |
|---|---|---|---|
| Solid drill holder | SK 40 / 50 | For holding solid drills with shank according to DIN 6595 and ISO 9766. Position of the front set screw offset by 0.4 mm with respect to the taper countersink in the cylindrical shank according to DIN 6595. The offset causes the collar of the solid drill to be clamped against the contact surface of the tool holder when the set screw is tightened. |  |
Hydraulic expansion chuck
| ย | SK-sizes | Execution / Notice | Representation |
|---|---|---|---|
| Hydraulic expansion chuck | Sk 40 / 50 | For tools with shanks to DIN 1835 Form A and B and DIN 6535 Form HA and HB. Shanks to DIN 6535 Form HE can only be used in conjunction with reducing bushes. Shank quality h 6, Ra min = 0.3. For ร 25 and ร 32 only form A or form HA can be used. |  |
Chuck for collets
| ย | SK-sizes | Execution / Notice | Representation |
|---|---|---|---|
| Chuck for collets ER/ESX 25/32/40 with female thread | SK 40 / 50 | For clamping tools with straight shank according to DIN 1835 form A, B and E and DIN 6535 form HA, HB and HE. Chuck with internal thread for adjusting screws. Other designs and dimensions on request. |  |
| Chuck for collets ER/ESX 11/16 with internal thread | SK 40 / 50 | For clamping tools with straight shank according to DIN 1835 form A, B and E and DIN 6535 form HA, HB and HE. Chuck with internal thread for adjusting screws. |  |
ย
Shell mill arbors
| ย | SK-sizes | Execution / Notice | Representation |
|---|---|---|---|
| Shell milling cutter arbors with enlarged contact diameter | Sk 40 / 50 | For clamping shell end mills and cutter heads with cross groove. Centrally drilled through as preparation for coolant supply. Clamping ร 40 and 60 with 4 threaded holes to accommodate cutter heads with tool mounting according to DIN 2079. |  |
Tool holder
| ย | SK-sizes | Execution / Notice | Representation |
|---|---|---|---|
| Tool holder for screw-in milling cutter | SK 40 / 50 | For clamping screw-in cutters with thread. |  |
Drill chuck
| ย | SK-sizes | Execution / Notice | Representation |
|---|---|---|---|
| Drill chuck | SK 40 / 50 | For holding tools with cylindrical shanks for use on machining centers and NC machines. High precision and concentricity. Holding torque at clamping diameter 12mm โฅ 70 Nm. Left-right rotation. Easy operation, clamping and releasing via supplied hexagonal pin wrench. |  |
Adapter
| ย | SK-sizes | Execution / Notice | Representation |
|---|---|---|---|
| Adapter SK / HSK | SK 40 / 50 | To accommodate HSK tools ISO 12164-1 form A and C, d1 = nominal size HSK. Without data carrier bore. |  |
| Adapter SK / PSC Axial clamping | SK 40 / 50 | To accommodate PSC tools ISO 26623-1, d1 = nominal size PSC. Without data carrier bore. |  |
ย
Tool blanks
| ย | SK-sizes | Execution / Notice | Representation |
|---|---|---|---|
| Tool blanks | SK 40 / 50 | For self-production of special tools. Material: Alloy case hardening steel. |  |